Looking for DXF editing component
Moderators: SDS, support, admin
Looking for DXF editing component
Hi, I have had a look at the CadSoftTools components and applications and it looks like they will be able to do what we are looking for.
Our requirement is as follows:
1. We have existing DXF drawings which have been done on an external system
2. We need to develop a .NET C# application which will be able to load a DXF image and do the following:
a) Allow the user to draw lines on the image using the mouse - each line must end in a number bubble - 1, 2, 3 etc.
b) We need a programmatic reference to the lines added to the DXF - i.e. we need to save the references in a database - the idea is that we are building a drawing annotation tool - the user needs to be able to select parts from a list and indicate the location of those parts on the DXF drawing. We also need to be able to click on the parts list in a .NET grid and the relevant annotation in the DXF drawing must be highlighted.
c) is should also be possible to programmatically delete and renumber the annotations that have been added to the drawing
d) it must be possible to save the DXF drawing with the annotations and load it in again in the future with the links to the database remaining intact
e) it must be possible to print the drawing in a formatted manual format. I have seen that you have the ability to open the CadSoftTools components in MS Word. Is it also possible to open then in Reporting Services? Since you have a HTML control I assume it is?
If the above is possible please indicate the components that we will need. Also the pricing on the components.
And lastly, is it possible to outsource the development of some of this development to your company?
Regards
Petr
________________________________________________
Petr Havlik
CyberPro Consulting
Johannesburg,
South Africa
Tel: +27 11 792 7926
Fax: +27 11 792 7926
Mobile: +27 82 458 0188
Web: http://www.cpconsulting.co.za
________________________________________________
Our requirement is as follows:
1. We have existing DXF drawings which have been done on an external system
2. We need to develop a .NET C# application which will be able to load a DXF image and do the following:
a) Allow the user to draw lines on the image using the mouse - each line must end in a number bubble - 1, 2, 3 etc.
b) We need a programmatic reference to the lines added to the DXF - i.e. we need to save the references in a database - the idea is that we are building a drawing annotation tool - the user needs to be able to select parts from a list and indicate the location of those parts on the DXF drawing. We also need to be able to click on the parts list in a .NET grid and the relevant annotation in the DXF drawing must be highlighted.
c) is should also be possible to programmatically delete and renumber the annotations that have been added to the drawing
d) it must be possible to save the DXF drawing with the annotations and load it in again in the future with the links to the database remaining intact
e) it must be possible to print the drawing in a formatted manual format. I have seen that you have the ability to open the CadSoftTools components in MS Word. Is it also possible to open then in Reporting Services? Since you have a HTML control I assume it is?
If the above is possible please indicate the components that we will need. Also the pricing on the components.
And lastly, is it possible to outsource the development of some of this development to your company?
Regards
Petr
________________________________________________
Petr Havlik
CyberPro Consulting
Johannesburg,
South Africa
Tel: +27 11 792 7926
Fax: +27 11 792 7926
Mobile: +27 82 458 0188
Web: http://www.cpconsulting.co.za
________________________________________________
Dear Petr Havlik,
It will be released <b>CAD Import .NET Pro</b> very soon which will allow most of demanded functionality.
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>If the above is possible please indicate the components that we will need. Also the pricing on the components.
And lastly, is it possible to outsource the development of some of this development to your company?</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Please contact us to info@cadsofttools.com accordingly to these questions.
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>e) ... I have seen that you have the ability to open the CadSoftTools components in MS Word. ...</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
As far as we can understand the speech goes about CADViewX Component. Please visit our web site for more info: http://www.cadsofttools.com/en/products/cadviewx.html
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>e) ... Is it also possible to open then in Reporting Services? ...</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Unfortunately we had no experience of working with <b>Reporting Services</b>.
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>e) ... Since you have a HTML control I assume it is?</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Both CADViewX Component (http://www.cadsofttools.com/download/cadviewx.zip) and CAD Import .NET (http://www.cadsofttools.com/download/cadimportnet.zip) packages contain respective demo applications.
Sergey.
Please post questions to the forum or write to support@cadsofttools.com
It will be released <b>CAD Import .NET Pro</b> very soon which will allow most of demanded functionality.
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>If the above is possible please indicate the components that we will need. Also the pricing on the components.
And lastly, is it possible to outsource the development of some of this development to your company?</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Please contact us to info@cadsofttools.com accordingly to these questions.
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>e) ... I have seen that you have the ability to open the CadSoftTools components in MS Word. ...</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
As far as we can understand the speech goes about CADViewX Component. Please visit our web site for more info: http://www.cadsofttools.com/en/products/cadviewx.html
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>e) ... Is it also possible to open then in Reporting Services? ...</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Unfortunately we had no experience of working with <b>Reporting Services</b>.
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>e) ... Since you have a HTML control I assume it is?</i><hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Both CADViewX Component (http://www.cadsofttools.com/download/cadviewx.zip) and CAD Import .NET (http://www.cadsofttools.com/download/cadimportnet.zip) packages contain respective demo applications.
Sergey.
Please post questions to the forum or write to support@cadsofttools.com